Installing a bidet can transform your bathroom routine. A Tushy Bidet adds hygiene and comfort. This guide shows you each step clearly. You’ll need just a few basic tools. Follow along to upgrade your bathroom today.
Contents
Installing the Tushy Bidet: Step-by-Step
Start by gathering everything you need. This intro will set you up for a smooth installation.
Materials and Tools
- Tushy Bidet attachment
- T-Valve adapter
- Bidet hose
- Adjustable wrench
- Screwdriver (Philips head)
- Teflon plumber’s tape
- Bucket or small bowl
- Clean towel
Turning Off the Water Supply
Locate the shut-off valve behind your toilet. Turn it clockwise until it stops. This cuts off water flow to the tank. Flush the toilet once to drain any remaining water. Keep a bucket or bowl under the valve to catch drips. Use an adjustable wrench to loosen the connection if it’s tight.
Wrap the wrench jaws with a towel to protect metal finishes. Ensure the valve is fully closed before proceeding. Check that the toilet tank stops refilling. This prevents water from spilling when you disconnect hoses.
Attaching the T-Valve Adapter
First, remove the flexible water supply hose from the toilet tank’s fill valve. Place your bucket underneath to catch drips. Wrap plumber’s tape around the threaded end of the fill valve.
Thread the T-Valve adapter onto the fill valve by hand. Turn it until it’s snug, then tighten with an adjustable wrench. Avoid overtightening to prevent damage. Next, reconnect the original supply hose to the bottom outlet of the T-Valve.
Ensure the connection is secure and leak-free. The side outlet will be where the bidet hose attaches. Confirm all connections are aligned before moving on to the next step.
Connecting the Bidet Hose
Take your bidet hose and wrap tape around each threaded end for a tight seal. Thread one end onto the T-Valve’s side outlet. Hand-tighten until it catches, then use the wrench for a gentle snug fit.
Guide the hose to the bidet attachment under the toilet seat. Loop the hose without kinks or sharp bends. Attach the other end to the bidet inlet by hand first. Then tighten with the wrench while protecting surfaces with a towel.
Check that the hose isn’t twisted or pinched. This alignment ensures proper water flow. Leave the wrench nearby in case you need slight adjustments after testing.
Mounting the Bidet Seat
Lift the toilet seat and find the mounting bracket slots on the bowl. Slide the Tushy Bidet’s mounting bracket into these slots. Make sure the bracket is level and fully inserted. Align the bidet attachment with the bracket rails. Gently slide the bidet toward the tank until it clicks into place. Test stability by moving the bidet slightly back and forth. Ensure it feels secure and doesn’t shift. If it moves, release and reinsert, checking alignment. Tighten any loose screws on the bracket with your screwdriver. Confirm the bidet is firmly in place before restoring water.
Restoring Water and Testing
Turn the shut-off valve counterclockwise to restore water flow. Watch the T-Valve and hose connections closely for leaks. If you see drips, tighten connections slightly with the wrench. Flush the toilet to ensure the bidet has proper pressure.
Activate the bidet function and let water run for a few seconds. Check under the seat for any seepage. If everything is dry, you’re good to go. Test all spray settings to confirm correct operation. Wipe down any wet spots with a clean towel. Your Tushy Bidet is now ready for use.
Features of the Tushy Bidet
Installing a Tushy Bidet transforms your bathroom routine with smart features. Each feature focuses on comfort, hygiene, and eco-conscious living.
- Adjustable spray pressure: You’re in control. A simple lever adjusts water intensity. It offers a gentle rinse or a powerful cleanse.
- Dual nozzle system: Two nozzles handle front and rear cleansing. Each is angled precisely for thorough cleaning. You can switch between them without moving the bidet.
- Angle and position control: The nozzles adjust to fit your body. A small dial shifts the spray up or down. This precision ensures efficient cleaning.
- Eco-friendly design: Every use reduces toilet paper waste. Soft-closing mechanics prevent accidental splashes. You’ll cut paper costs and shrink your environmental footprint.
- Quick-release seat mechanism: You can remove the bidet seat in one smooth motion. This makes deep cleaning around the toilet easier. No tools are required.
- Sleek, minimalist aesthetic: Its low-profile silhouette blends with most toilets. A smooth white finish resists stains and fingerprints. You’ll enjoy a modern look.
- Durable construction: High-quality plastic resists cracks and discoloration. All components meet NSF/ANSI water safety standards. You can trust it to last without leaking.
- Tool-free adjustments: Installation and tweaks don’t need a toolbox. A simple twist of knobs secures hoses and nozzles. You’ll spend less time fumbling with hardware.
- Easy DIY installation: The kit includes a T-valve adapter and hose. Just follow the instructions and grab a wrench. Most installs take under 30 minutes.
- Gentle, continuous water flow: Instead of sudden bursts, you get a smooth stream. This steady flow feels more comfortable and prevents splashing.
- Integrated water filtration: A built-in filter removes impurities and sediment, so each spray feels clean and fresh every time. Maintenance is simple: Replace the filter annually.
- Universal fit compatibility: It works with most standard two-piece toilets. The adjustable mounting bracket adapts to different bowl shapes. You won’t struggle to fit your seat.
Checking for Leaks and Making Adjustments
After testing your bidet, inspect every connection closely. This step ensures you catch drips before they cause damage.
- Place a clean towel under the T-valve and hose connections.
- Feel each joint gently to check for moisture.
- Turn the bidet lever on and off to pressurize the water lines.
- If you spot a droplet, tighten the fitting by hand. Use a wrench for a slight snug.
- Check the hose where it meets the bidet seat for any looseness.
- Run the bidet on all spray settings for one full minute.
- Observe under the seat and around the tank for leaks.
- Flush the toilet and inspect the floor around its base for water.
- Sit on the toilet and activate the bidet to check nozzle alignment.
- Use the angle dial to adjust the spray until it hits the intended area.
- Ensure the nozzle retracts fully when you turn off the lever.
- Wipe down all fittings and dry the towel.
Cleaning and Maintaining Your Tushy Bidet
Keeping your Tushy Bidet clean and well-maintained ensures peak performance and hygiene. A simple routine prevents buildup and extends its lifespan. Follow these guidelines regularly to keep your bidet fresh and reliable.
Regular Cleaning
Wipe down the nozzle and attachment weekly. Use a soft cloth dampened with mild soap and warm water. Rinse the cloth and remove any soap residue.
Dry the surfaces with a clean towel. Check the mounting bracket for dust or debris. A quick wipe prevents grime from accumulating. You’ll enjoy a smooth spray every time.
Deep Cleaning
Once a month, perform a thorough cleaning. First, turn off the water supply and flush to empty the lines. Remove the nozzle by following your model’s instructions. Soak it in a solution of white vinegar and water for fifteen minutes.
This dissolves mineral deposits and bacteria. Use a soft brush to scrub inside the nozzle holes. Rinse under running water until all vinegar is gone. Reattach the nozzle and restore the water supply. Test the spray to ensure proper flow.
Maintaining Filters
Your Tushy Bidet has a built-in water filter to trap sediment. Check it every three months. Turn off the water and disconnect the hose. Remove the filter cartridge and rinse under clean water. If you see discoloration or debris that won’t wash away, replace the filter.
A fresh filter delivers clean water and protects internal parts. Insert the new or cleaned filter and reconnect the hose. Turn on the water and test for leaks.
Checking for Wear and Tear
Inspect hoses and connections every six months. Look for cracks, kinks, or loose fittings. A worn hose can cause leaks or reduced pressure. Tighten any loose nuts with an adjustable wrench.
Replace hoses that show signs of damage. Examine the mounting bracket for rust or brittleness. Swap out faulty parts immediately. A small upgrade now avoids larger repairs later.
Seasonal Maintenance
Before winter arrives, inspect seals to prevent freezing. Apply a non-toxic lubricant to metal parts. This protects against rust in humid conditions. In humid climates, wipe down the bidet more often to deter mold.
In dry climates, check for dried seals and rehydrate them with silicone lubricant. Seasonal attention reduces wear and keeps the bidet functioning smoothly.
Avoid harsh chemicals and abrasive cleaners. They can damage plastic and seals. Use gentle, eco-friendly cleaners instead. Keep spare filters and hoses on hand for quick replacement. A small toolkit with a wrench and screwdriver comes in handy. Stick to a maintenance schedule to enjoy a clean, safe bidet for years.
Conclusion
Installing a Tushy Bidet is a straightforward way to upgrade your bathroom. You’ll enjoy improved hygiene and comfort with each use. Regular checks and simple cleaning keep it working like new. No special tools are needed for routine maintenance. Embrace this eco-friendly upgrade and start saving on toilet paper.
We have more ways of improving your bathroom. Check out our guide on bathroom renovations!
