{"id":3317,"date":"2014-12-04T17:09:10","date_gmt":"2014-12-04T07:09:10","guid":{"rendered":"http:\/\/project.theownerbuildernetwork.co\/?p=3317"},"modified":"2024-08-30T09:31:18","modified_gmt":"2024-08-29T23:31:18","slug":"diy-under-the-staircase-cabinet","status":"publish","type":"post","link":"https:\/\/theownerbuildernetwork.co\/project\/2014\/12\/04\/diy-under-the-staircase-cabinet\/","title":{"rendered":"Amazing Under-The-Staircase Cabinet: Save Space in 8 Steps"},"content":{"rendered":"\n<figure class=\"wp-block-image aligncenter size-large size-full wp-image-3337\"><a href=\"https:\/\/project.theownerbuildernetwork.co\/files\/2022\/10\/StaircaseCabinet-scaled.jpg\"><img decoding=\"async\" src=\"https:\/\/project.theownerbuildernetwork.co\/files\/2022\/10\/StaircaseCabinet-1024x686.jpg\" alt=\"A under-the-staircase cabinet\" class=\"wp-image-38538\" \/><\/a><figcaption class=\"wp-element-caption\"><em>DIY Under-The-Staircase Cabinet<\/em><\/figcaption><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">There aren\u2019t many homes that can\u2019t use some additional storage space. If you have a large family and a small home, you\u2019ll know&nbsp;just how hard it is to find that extra storage space.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">You might find what you\u2019re looking for underneath the stairs in your home. There lies a void that you can turn into a clever storage system &#8211; a DIY <strong>under-the-staircase cabinet<\/strong>!<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><a href=\"https:\/\/project.theownerbuildernetwork.co\/files\/2022\/10\/BeFunky-collage-3-scaled.jpg\"><img decoding=\"async\" src=\"https:\/\/project.theownerbuildernetwork.co\/files\/2022\/10\/BeFunky-collage-3-1024x686.jpg\" alt=\"\" class=\"wp-image-38543\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">This under-the-staircase cabinet combines beauty and functionality for that under-used space under the stairway. Although the under-the-staircase cabinet featured here is definitely the&nbsp;work of a skilled craftsman, you can still get the same result if you build it yourself by extracting ideas from his work.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">After all, you\u2019ll need to customize the staircase cabinet to fit your space. And even if you\u2019re living in a one-storey home you can still use this as a fabulous wall unit.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Building an Under-The-Staircase Cabinet<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Materials<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>5 pieces of 12\u2032, 2\u2033 thick Black Cherry boards<\/li>\n\n\n\n<li>1\/16\u2033 Veneer Panels<\/li>\n\n\n\n<li>1\/2\u2033 ultra-light MDF<\/li>\n\n\n\n<li>Pencil<\/li>\n\n\n\n<li>Masking Tape<\/li>\n\n\n\n<li>Yellow Glue<\/li>\n\n\n\n<li>Foam Roller<\/li>\n\n\n\n<li>Vacuum Bag<\/li>\n\n\n\n<li>Rags<\/li>\n\n\n\n<li>32mm Cup Hinges<\/li>\n\n\n\n<li>Oil or Spray Finish<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Tools<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Table Saw<\/li>\n\n\n\n<li>Belt Sander<\/li>\n\n\n\n<li>Orbit Sander<\/li>\n\n\n\n<li>Horizontal Mortiser<\/li>\n\n\n\n<li>Jointer Set<\/li>\n\n\n\n<li>Cabinet Scraper<\/li>\n\n\n\n<li>Miter Gauge<\/li>\n\n\n\n<li>Clamps<\/li>\n\n\n\n<li>Chisel<\/li>\n\n\n\n<li>Milling Machine<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Steps<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Once the design of my under-the-staircase cabinet was finalized, I did some calculations and headed to the lumber yard and bought 5 12\u2019 8\/4 boards of black cherry to build the frame of the piece.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Back in the shop, I cut down all the rough boards except for one, which I made the longest members with.&nbsp;Then I straightened one face and one edge of each board on the jointer and sent them all through the planer to get an even and consistent thickness of 1 13\/16\u201d.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">After that, I ripped all the boards on the table saw down to 1 13\/16\u201d square and sent them all through the wide belt sander to achieve even 1 3\/4\u201d square stock for my under-the-staircase cabinet.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Then I carefully calculated a cut list for the stock and cut all parts of the under-the-staircase cabinet to length on the table saw.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img fetchpriority=\"high\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet01.jpg\" alt=\"DIYUnderStaircaseCabinet01\" class=\"wp-image-3318\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet01.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet01-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Moving to the horizontal mortiser, I carefully set up an exactly centred mortise in the stock and begin cutting mortises at the ends of all the short pieces of the under-the-staircase cabinet and then on the longer pieces, I took time to lay out the mortise location.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><a href=\"https:\/\/project.theownerbuildernetwork.co\/files\/2022\/10\/DIYUnderStaircaseCabinet02-scaled.jpg\" data-lasso-id=\"9950\"><img decoding=\"async\" src=\"https:\/\/project.theownerbuildernetwork.co\/files\/2022\/10\/DIYUnderStaircaseCabinet02-1024x735.jpg\" alt=\"\" class=\"wp-image-38546\" \/><\/a><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Once all mortises were cut, I dry fit the carcass to see the shape of things to come.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet03.jpg\" alt=\"DIYUnderStaircaseCabinet03\" class=\"wp-image-3320\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet03.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet03-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Then, I measured for all the panels to fill in the backs, dividers, and sides.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Using 1\/16\u201d thick veneer I cut panels for all the back panels and interior dividers.&nbsp; For the outer walls, I carefully book-matched some of the same material into 9\u2019 x 22\u201d panels so the grain followed up the \u2018treads\u2019 and also the \u2018risers\u2019 as you look at the unit from the side or top.&nbsp;<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This effect is subtle but was worth doing. This detail only takes some careful planning and labelling as you go.&nbsp;To make a tight\/straight joint on the veneer, run it across the jointer set very low.&nbsp;This trick will only work with the extra thick veneer.&nbsp; I then secure the joint with regular masking tape.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For the substrate, I used \u00bd\u201d ultralight MDF.\u00a0 Since the panels aren\u2019t structural, the less weight for the under-the-staircase cabinet will be appreciated later.\u00a0I cut pieces to match the laid-up panels on the table saw.\u00a0\u00a0 Using a foam roller I applied an even coat of yellow glue to the veneer and one side of the substrate and slid it into my vacuum bag face down.\u00a0<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Some prefer to glue both sides at once; I\u2019ve never had any problem doing one side at a time.&nbsp; I leave each side to dry for a minimum of 4 hours.&nbsp; There are a lot of panels \u2013 this takes a few days.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">When the panels of the under-the-staircase cabinet were all done, I scraped the tape with a cabinet scraper.\u00a0 If you don\u2019t have a wide belt sander I strongly recommend looking into renting an hour-on-one at a local cabinet shop.\u00a0 This will give you consistent thickness and a uniform sanding pattern for your under-the-staircase cabinet.\u00a0 You\u2019ll still need to finish the sand prior to assembly, but this is unavoidable.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet04.jpg\" alt=\"DIYUnderStaircaseCabinet04\" class=\"wp-image-3321\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet04.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet04-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">With the frame of the under-the-staircase cabinet still dry fit together, I labelled all of the parts.\u00a0I also marked where every panel went.\u00a0Take the extra time to double-check that every part is labelled and the position of each panel is well-marked.\u00a0 I have not missed one, so triple-check.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Back at the table saw, I set the dado blade to the thickness of the sanded panels plus a \u2018hair\u2019.&nbsp; Just loose enough to get a piece bit of paper into the slot with the panel.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Now, I cut all the dados in the members as marked.&nbsp; There are some that required stopped dados.&nbsp; When you do this, PLEASE TAKE YOUR TIME!&nbsp; Stopped dados need an extra special care on the table saw.&nbsp; I did mine on a Saw Stop and was glad to know I had that extra security.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I made some \u00bd loose tenon stock and sized them to fit the exact width of the mortises.&nbsp; Then I set a stop on a mitre gauge and cut enough for all the front and back mortises.&nbsp; I cut them 1\/8\u201d shorter than the combined depth.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I then glued the front frames of the under-the-staircase cabinet together.\u00a0 I choose to do this in stages when possible.\u00a0It\u2019s nice to be able to just have a few elements to have control and square up.\u00a0 As each element is glued together I take careful care to check for squareness.\u00a0 Tight and straight work is imperative at this stage.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet05.jpg\" alt=\"DIYUnderStaircaseCabinet05\" class=\"wp-image-3322\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet05.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet05-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">I measured off the front frames for the sizes of the back panels.&nbsp; Adding to the depth of the dados, I cut the panels starting with the largest ones first and took care to choose pleasing grain placement.&nbsp;Then, I finish sanded all panels to 220 grit and eased all the edges.&nbsp; This is important to avoid chipping the veneer during construction.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Next, I glued up the back panels.&nbsp; Now it\u2019s coming together!<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet06.jpg\" alt=\"DIYUnderStaircaseCabinet06\" class=\"wp-image-3323\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet06.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet06-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">For the last time, I dry-fit the cases together and measured the missing panels.&nbsp;I sized and sanded all panels taking careful care to label the riser and tread panels to keep them in order.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I sanded the front and back frames, preparing for the big glue-ups.\u00a0I took an extra minute and ran some 180 grit along each dado.\u00a0This helps the parts of the under-the-staircase cabinet come together when the heat is on and the glue is setting.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet07.jpg\" alt=\"DIYUnderStaircaseCabinet07\" class=\"wp-image-3324\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet07.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet07-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Now I gathered clamps, a couple of glue bottles, some rags and a rosary.\u00a0 I cleared the workspace and carefully laid out all the parts of the under-the-staircase cabinet needed and devised a plan for applying glue and inserting tenons and panels as smoothly as possible.\u00a0\u00a0<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">At the start of your glue-up, take a deep breath and get going.&nbsp; If all goes well \u2013 congratulations, if not pull it apart.&nbsp; It\u2019s not worth getting it wrong.&nbsp; Take it apart, wipe off the glue and try again the next day.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Now invite friends and family to tell you how clever you are for making such a cool under-the-staircase cabinet.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet08.jpg\" alt=\"DIYUnderStaircaseCabinet08\" class=\"wp-image-3325\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet08.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet08-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>THE DOORS<\/strong> &#8211;&nbsp;With a sharp chisel and a random orbit sander, I cleaned up the extra glue and smoothed the joints and was sure not to round over any of the nice square pieces.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">On a piece of paper, I laid out the different panelled doors. Then, taking care of my measurements off of the case, I created a cut list for the necessary parts.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I milled the necessary stock to a strong 3\/4\u201d and also laid up the necessary door panels for the under-the-staircase cabinet as described earlier. Once I milled the stock, I checked the original dimensions carefully and sized all stock on the table saw.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet09.jpg\" alt=\"DIYUnderStaircaseCabinet09\" class=\"wp-image-3326\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet09.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet09-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Then, I cut mortises in all the necessary joints \u2013 this should only take one setup on the mortiser.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I put panels in the veneer press one side at a time. After pressing, I removed all glue from the press panels and sand panels. As with the frame, I cut dado\u2019s to allow for panels. Once again, you should be very careful with the stopped dado.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I glued up the doors of the under-the-staircase cabinet, taking care that they were flat and square.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For the sliding doors, I repeated all the same steps but made the stock 5\/8\u201d thick.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Using a calculator, I devised a symmetrical layout for the decorative latticework.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">With decorative lattice strips prepared, I created \u2018layout\u2019 blocks to help evenly space the strips. I marked all joints with a pencil and cut on a mortising machine.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet10.jpg\" alt=\"DIYUnderStaircaseCabinet10\" class=\"wp-image-3327\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet10.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet10-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">I glued up the sliding doors \u2013 the same as the regular doors. Then, I sanded all doors, paying close attention to the joints; making them nice and even.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">On the regular swinging doors, I bored for 32mm cup hinges. At the same time, I took a sacrificial piece of wood \u2013 the same vertical size as the door \u2013 and bore that as well.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I mounted cup hinges in the sacrificial member in order to align the cabinet hardware of the hinge.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Now, I placed the sacrificial stick in the cabinet with a \u00bc\u201d setback, taking care to keep the stick perfectly vertical.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I attached the door hardware to the cups and placed the doors in the stepped cabinet. Are you still with me?<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Then I made adjustments for even spacing for optimal 1\/16\u201d reveal all the way around and smooth swinging.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet11.jpg\" alt=\"DIYUnderStaircaseCabinet11\" class=\"wp-image-3328\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet11.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet11-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">On to the sliders; I installed the decorative <a href=\"https:\/\/en.wikipedia.org\/wiki\/Latticework\" target=\"_blank\" rel=\"noreferrer noopener\">latticework<\/a> of the sliders.\u00a0 My first step was to size all the sticks, disregarding the need for joinery.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Then, in two stages, I marked for the joinery. First I installed all the vertical sticks at once and with a long straight edge and marked all the necessary dado\u2019s.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I remove the horizontal sticks and repeated the steps above for the vertical sticks.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">With a mitre gauge on the table saw and my blade just coming out of the table, I cut all necessary dados, taking time to fit each one.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet12.jpg\" alt=\"DIYUnderStaircaseCabinet12\" class=\"wp-image-3329\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet12.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet12-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">I glued it all together with the assistance of a little hammer.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet13.jpg\" alt=\"DIYUnderStaircaseCabinet13\" class=\"wp-image-3330\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet13.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet13-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Then I moved on to drawers. I decided what size I wanted my drawers to be and sized my stock. I like \u00bd\u201d wall drawer boxes.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">I cut dovetails (use whatever method you are comfortable with) and glued the drawers together. Then, I decided what kind of drawer fronts and handles I wanted. I fabricated, sanded and attached to the drawers after they\u2019d been sanded.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet14.jpg\" alt=\"DIYUnderStaircaseCabinet14\" class=\"wp-image-3331\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet14.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet14-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">After, I final sanded all my parts \u2013 case and all. For this, I suggest you wear your dust mask and turn your radio really loud, this step is going to take a while.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Time for finish work. I chose to spray all my parts. You may choose the same or to oil. As with all steps, take your time here.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet15.jpg\" alt=\"DIYUnderStaircaseCabinet15\" class=\"wp-image-3332\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet15.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet15-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Any piece of furniture is only as good as the finish that you put on it.<\/p>\n\n\n\n<figure class=\"wp-block-image\"><img loading=\"lazy\" decoding=\"async\" width=\"768\" height=\"1024\" src=\"http:\/\/project.theownerbuildernetwork.co\/files\/2014\/12\/DIYUnderStaircaseCabinet16.jpg\" alt=\"DIYUnderStaircaseCabinet16\" class=\"wp-image-3333\" srcset=\"https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet16.jpg 768w, https:\/\/theownerbuildernetwork.co\/project\/files\/2014\/12\/DIYUnderStaircaseCabinet16-225x300.jpg 225w\" sizes=\"(max-width: 768px) 100vw, 768px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">This project may look like a lot of work with all its small details, but we&#8217;re confident&nbsp;you can pull it&nbsp;off. Ready for this DIY project? \ud83d\ude42<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Thanks to <a title=\"nojodesign\" data-lasso-id=\"331\" href=\"https:\/\/www.instructables.com\/member\/nojodesign\/\" target=\"_blank\" rel=\"noopener\">nojodesign<\/a> for this great tutorial!<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">We have more space saving solutions for your home. Check out our <a href=\"https:\/\/project.theownerbuildernetwork.co\/2017\/03\/29\/diy-swivel-storage-cabinet\/\">swivel storage cabinet<\/a>!<\/p>\n","protected":false},"excerpt":{"rendered":"<p>There aren\u2019t many homes that can\u2019t use some additional storage space. If you have a large family and a small home, you\u2019ll know&nbsp;just how hard it is to find that extra storage space. You might find what you\u2019re looking for underneath the stairs in your home. There lies a void that you can turn into [&hellip;]<\/p>\n","protected":false},"author":13557,"featured_media":3333,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"%%post_title%%","_seopress_titles_desc":"An under-the-staircase cabinet lets you declutter your home while saving space. Build this unique cabinet with our complete DIY guide!","_seopress_robots_index":"","_seopress_robots_follow":"","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"","_seopress_redirections_param":"","_seopress_redirections_type":0,"_seopress_analysis_target_kw":"Under-The-Staircase Cabinet","_seopress_news_disabled":"","_seopress_video_disabled":"","_seopress_video":[],"_seopress_pro_schemas_manual":[],"_seopress_pro_rich_snippets_disable_all":"","_seopress_pro_rich_snippets_disable":[],"_seopress_pro_schemas":[],"_lmt_disableupdate":"","_lmt_disable":"","sma_last_campaign_date":"","footnotes":""},"categories":[12,15],"tags":[429,51,292,290],"class_list":["post-3317","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-furniture","category-indoor","tag-home-organizing","tag-multi-purpose","tag-space-saving-idea","tag-storage-projects"],"modified_by":"julian","_links":{"self":[{"href":"https:\/\/theownerbuildernetwork.co\/project\/wp-json\/wp\/v2\/posts\/3317","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/theownerbuildernetwork.co\/project\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/theownerbuildernetwork.co\/project\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/theownerbuildernetwork.co\/project\/wp-json\/wp\/v2\/users\/13557"}],"replies":[{"embeddable":true,"href":"https:\/\/theownerbuildernetwork.co\/project\/wp-json\/wp\/v2\/comments?post=3317"}],"version-history":[{"count":0,"href":"https:\/\/theownerbuildernetwork.co\/project\/wp-json\/wp\/v2\/posts\/3317\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/theownerbuildernetwork.co\/project\/wp-json\/wp\/v2\/media\/3333"}],"wp:attachment":[{"href":"https:\/\/theownerbuildernetwork.co\/project\/wp-json\/wp\/v2\/media?parent=3317"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/theownerbuildernetwork.co\/project\/wp-json\/wp\/v2\/categories?post=3317"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/theownerbuildernetwork.co\/project\/wp-json\/wp\/v2\/tags?post=3317"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}